Plastic Components Injection Molding and Custom Plastic Insert Molding.

Nordon the Plastic Component Source for Custom Plastic Packaging, Sonic Welding, and Plastic Prototypes.

Nordon Logo


Profile
Customers
Capabilities
Production
Engineering
Tool Building
Value/Quality
Testing
Materials
Request A Quote
Directions





Partner with NORDON
The Plastic Component Source
www.nordonplastics.com
Back to Materials List

PES Polyethersulfone
Specific Gravity                    1.37
Shrinkage,in/in,1/8 in. thick     0.0070
Shrinkage,in/in,1/4 in.thick      0.0080
Water Absorption,% 24hrs           0.430
MECHANICAL
Impact,Izod,Notched  (Ft-Lb/In)     1.60
Impact,Izod,Unnotched(Ft-Lb/In)    12.00
Tensile Strength (Psi)            12,000
Tensile Elongation (%)            50.000
Tensile Modulus (Psi x E+6)         0.35
Flexual Strength  (Psi)           18,500
Flexural Modulus  (Psi x E+6)       0.37
Compressive Strength (Psi)        15,000
Hardness  (Rockwell R)             120.0
ELECTRICAL
Dielectric Strength   (V/Mil)        400
Dielectric Constant(@ 1 MC dry)     3.50
Dissipation Factor(@ 1 MC dry)     0.006
Arc Resistance   (sec)                70
Volume Resistivity(ohm-cm)10E##     17.0
THERMAL
Heat Deflection Temp 264 psi(F)      398
Heat Deflection Temp 66 psi(F)       405
Flammability                          V0
Thermal Expansion (In/In/F)xE-5    3.100
Thermal Conductivity                 1.9
WEAR
Wear Factor                           NA
U L yellow card                       NO
Back to Materials List